Universal Grill Rotisserie Spit Rod Kit Universal Kit 37 inch with four prong rotisserie forks

Home > Universal & Weber Fit Grill Rotisserie Spit Kits > Universal Grill Rotisserie Kits > SHOP BY GRILL WIDTH (PREFERRED METHOD) > GRILLS UP TO 31" (37" Spit Rod) >

OneGrill Universal Grill Rotisserie Kit -37" x 5/16" w/o Motor and Brackets

Alternative Views:

List Price: $36.99

Reg. Price: $30.99

Availability: Usually Ships in 2-3 Business Days
PRODUCT CODE: 4PS12

Qty:

PRODUCT OVERVIEW:

FAQS & FACTS

This grill rotisserie kit is designed as a replacement or upgrade to many popular existing kits with an existing motor and a bracket. With a 37" x 5/16" square chrome rotisserie rod, this kit is ideal for small grills and applications up to 31" in width. This kit comes complete with a set (2) chrome plated four prong offset grill rotisserie forks, a chrome plated rotisserie bushing, a chrome plated counterbalance system, and a high quality insulated handle. Please note the entire spit rod length is 37" with a 5/16" square drive common to most motors available and a threaded end to accommodate the usage of a counterbalance system and handle (included). All plating is double food safe chrome plating for easy clean up and extended life.

*The following PDF documents are provided for additional fitment information. Components may vary by specific product as described. Please also see the "FAQS & FACTS" section for additional product information.

-GRILL FITMENT MEASUREMENT GUIDE

-UNIVERSAL ROTISSERIE COMPLETE ASSEMBLY INSTRUCTIONS

Will the bracket set in this kit fit my grill (if included)?
--The bracket set included in this kit (if included) is designed to fit as many grills as possible. With 100's of new grill designs each year, it is difficult to create a bracket set that will work with 100% of them. Please note that some grills have been designed with the intention for a rotisserie add on, but that there is simply no rotisserie kit available that will be a direct bolt on. Some light customization may be necessary. Please CLICK HERE to see our schematic for the included bracket set.

What length of spit rod do I need to fit my grill?
-- All of our kits are labeled according to the total length of the spit rod. Generally, the safe measure is to take the total width of your grill and add 6 inches to the total to determine the best size kit. It is perfectly acceptable to have a spit rod greater than 6 inches beyond your grills width (i.e. your grill width is 33 inches; a 45" kit will work well for your grill). Please CLICK HERE to see our measurement guide.

How does this mount to my grill?
--Although not all grills will follow the same exact installation procedures, in general, installation will be similar. Please CLICK HERE to see our setup guide. As different kits include different components some steps may be unnecessary dependent on the kits included components.

How much weight will this kit rotisserie?
--All of our kits feature several variations that will determine weight capacity. Although 1 piece of the kit may carry a heavier weight capacity than the rest, generally the lowest weight capacity item should be used to determine the overall weight capacity of the kit. Please keep in mind that weight capacity is completely subjective as several factors outside of the rotisserie kits control will play a factor in totaling a capacity. This includes the horizontal and vertical distribution of the weight, what animal is to be cooked, and how the animal is fastened. As the length of the spit rod increases so does the opportunity for deflection. Please consider all of these variables. Below are general guidelines for the weight capacities of our spit rod sizes and motors. These values are conservative; as you become more experienced at balancing your load you will be able to better maximize on these values and reach their true potential. You will notice in many items higher quoted maximums. These are achievable through practice and growing confidence and understanding of the importance of load balancing.
***SPIT RODS DIAMETERS***
5/16" Square: 0-15 pounds
1/2" Hexagon: 0-30 pounds
5/8" Hexagon: 0-60 pounds
***MOTOR RATINGS***
Cordless Motors: 0-20 pounds
Standard Electric Motors: 0-30 pounds
Heavy Duty Motors: 0-85 pounds

Who designs and fabricates this item?
--All design and engineering is completed in house in Cincinnati, Ohio. We take a great deal of pride in our approach to product development. All of our products are designed around the concept of functionality, safety, and overall quality. We strive to make the best rotisserie kits on the planet at the most affordable prices. This item has been manufactured to our specifications in Taiwan. All of our kits are bundled and packaged in Cincinnati, Ohio by our dedicated and knowledgeable staff.

I have more questions!
--We love to hear from our customers! We are a small staff dedicated to understanding and using our products. If you don't see the answer to your specific question please feel free to contact us, please CLICK HERE. We will answer you with exactly the information you need and as quickly as possible.

Features

Designed as a replacement or upgrade to existing grills with brackets and motors.
Includes 37" X 5/16" square rotisserie spit rod with standard 5/16" drive end
Includes fully adjustable 4 prong offset rotisserie forks
Includes fully adjustable counterbalance system
Includes adjustment bushing for added adjustability
Includes high quality molded plastic handle
All metal components are double chrome plated in food safe chrome
*See FAQS & FACTS Section for additional fitment and capacity information
1 year OneGrill™ "No Hassle" Warranty
Product Code: 4ps12